ULX1 Bodypack Transmitter

 

Find stores in my area:


Show Online Shops

Low profile, highly durable Bodypack Transmitter for professional performance
Share:  
  • Description
  • Features
  • Specs
  • Downloads
  • Frequency Versions

Description:

The ULX1 Wireless Handheld Transmitter offers advanced features and controls including a backlit LCD display showing group, channel and battery fuel guage.  It also has frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary and power lockout cabability and can be used continuously for up to 8 hours using 1 x 9v Battery (included).

This transmitter requires the ULXP4 receiver to complete the system.

Features:

  • Three-segment battery fuel gauge
  • FrequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary and power lockout
  • Flexible 1/4 wave antenna
  • TA4F mini four-pin input connector
  • Backlit LCD display shows group and channel setting
  • Adustable audio gain control
  • Input attenuation switch (selects 0 dB or -20 dB attenuation)
  • PEAK icon appears when audio input overloads the transmitter
  • Power on/off switch
  • 300 foot (100m) operating range

Specs:

  • Transmitter Type: Bodypack
  • Dimensions: 83 mm x 64 mm x 26 mm
  • Battery, endurance: 9v, >8 h
  • Weight: 91 g
  • Further technical specifications:
    • Effective Range:  100 m (300 ft.) under optimal conditions
    • Audio Frequency ResponseThis is the range of frequencies, from the lowest to the highest, that a mic can pick up.Read moreGo to the glossary:  25 to 15,000 Hz, ±2 dB
    • Transmitter Gain Adjustment Range:  25 dB  
    • Receiver Audio Output Level (±38 kHz deviation, 1 kHz tone)
    • XLR connector (into 600 ohm load): +3.9 dBV (line), –17 dBV (mic)
    • 1/4 inch connector (into 3000 ohm load): –2 dBV
    • RF SensitivityThis is how mich signal a microphone produces for a given amount of sound.Read moreGo to the glossary:  1.26 μV for 12 dB SINAD (typical)
    • Image Rejection: 80 dB typical
    • Spurious Rejection: 75 dB typical
    • Ultimate Quieting (reference ±38 kHz deviation) : >105 dB, A-weighted
    • System Distortion (reference ±38 kHz deviation, 1 kHz modulation):  0.3% total harmonic distortionTotal Harmonic Distortion is a measure of how much electrical noise a device produces. Read moreGo to the glossary, typical
    • Power Requirements:  9V alkaline battery; 8.4 V Nicad optional
    • Battery Life:  8 to 9 hours (with 9V alkaline battery)
    • Operating Temperature Range:  - 20° to 49° C (- 4° to 120° F) 
    • Net Weight:  79 g
    • Dynamic RangeThis is the difference between the queitest and loudest sound that a mic can pick up.Read moreGo to the glossary: >100 dB, A-weighted
    • Dimensions :  96.5mm H x 67mm W x 26.7mm D
  • Frequency Versions:

    Frequency ranges and power output for the transmitters

    Band 

    Range

    Power Output

    G3E

    470-506 MHz 

    30 mW
    K2E*

    606-642 MHz

    10 mW
    M2 662-698 MHz  30 mW
    Q2

    748-784 MHz  

    30 mW
    S3 **

    829-865 MHz 

    10 mW

    * Primary UK frequency version covering Channel 38. Usable now and after the 2012 switchover. 

    ** Can be used after 2012 switchover if tuned to licence free deregulated spectrum (863-865) ONLY.

    Channel 38 switchover information and helpline 01992 703038

    Please note that a valid license is required to operate wireless equipment in Channel 38. Contact JFMG at www.jfmg.co.uk for details.

    Optional Accessories

    WA570A
    WA302 Guitar Cable
    WA302
    WA304